Fig. 245 Diagram: Bulb holder with a bayonet fastener

In the case of bulb holders with a bayonet fastener please proceed as follows:

Removing the bulb holder

– Turn the bulb holder in the direction of the arrow A ⇒ fig. 245 as far as it will go and then take the bulb holder out of the light unit.

Fitting the bulb holder

– Insert the bulb holder into the light unit, making sure you keep the bulb holder straight, i.e. the rubber seal makes even contact all around.
– Turn the bulb holder in the direction indicated by the arrow B ⇒fig. 245 as far as it will go.